Remote Monitoring
Bannow’s Pumpwatch monitoring system is a simple yet highly effective way to monitor pumps, lift stations and treatment plants. If there is a fault it will send an alarm message by voice message or SMS. It can be accessed over a local area network or over the internet.
Plug & Play
Designed to be plug and play Pumpwatch will work with any digital or analog sensor, such as flow, pressure, temperature or water quality. It can tell if a piece of equipment has failed and it will keep a log of all incidents, for example if a pump trips and resets itself.
Monitor
- Flow rate
- Total flows
- Pressure
- Temperature,
- Dissolved Oxygen
- Pump run/trip
- Levels in tanks and sumps
- Motors turning
- River quality
- Air quality
Features
| Alarms | Can be sent directly to a PC by email, to phones by recorded message, to mobile phones by SMS or all of the above |
| Access | Local area Network, over the internet or direct connection to PC |
| Control | Simple control features such as resetting pumps or operating valves are possible as an optional extra |
| Plug & Play | Designed to be plug and play Pumpwatch will work with digital or analog sensors, such as flow, pressure or temperature. It can tell if a pump has tripped and it will keep a log of all incidents, such as if a pump trips and resets itself. |
| Software | The set up can be as simple or sophisticated as the client wishes. The standard package will be specific to the client’s installation. This can be updated remotely at any time. |
| Compact | Can be built into a standard control panel or be stand-alone |
| Simple to Install | Can be installed by any competent electrician |
| Remote access | View current status remotely via LAN or over the internet |
| Modular | Additional signals can be monitored if the system increases |
| Data Logger | The Pumpwatch will record all inputs and store them locally and in the cloud for viewing or downloading later. |
